Pages

Tuesday, June 24, 2014

Single Layer Winding Diagram 1500 Rpm In series and parallel

Three Phase Elektrim Induction Motor 1430 Rpm


Switching connection between the coils in each phase has a significant effect on the diameter of the wire used in the electrical motor rewinding, we sometimes encounter a situation where the diameter of the wire that we have not used in accordance with the specifications or the diameter of the wire that we need are not available , then by changing the existing connections in the stator coils, either from parallel connection turned into a series connection or series of connections turned into a parallel connection or a combination of both these connections, can be an alternative solution in rewinding electric motors.
Description
Based on 'Elektrim Induction Motor' 
Rated Voltage 220V Δ/380 Y, Rated Output 7,5 Hp, Slots 36, Rated Freq 50 Hz, 1430 Rpm
Wire Diameter 0,85mm x 2, No of turns 57, Coil Span 7,9.
U1  : X1+X3

U2  : X2+X4
V1  : Z1+Z3

V2  : Z2+Z4

W1 : Y4+Y2
W2 : Y1+Y3

3 comments:

  1. NEED 22KW 1400 RPM PARREL WINDING DIAGRAM

    ReplyDelete
  2. If you are looking for motor winding diagrams, please check the BobiSoft 2.0. It is an easy-to-use, low-cost software package to (re)design motor windings. It can help you saving time and money!
    The software is recommended by WEG Portugal.
    More information at
    www.optisigma.pt

    Any doubts? Send an e-mail to: fernando.optisigma@gmail.com

    ReplyDelete
  3. i have an (ABB) Electrical motor stator coil with the following specification>
    kw 420
    voltages 440
    RPM 1788
    HZ 60
    AMP. 683
    SLOT 72
    SPAN 1-16
    PICTH 6
    Please IM NOT TOO COMFORTABLE WITH THE SPAN 1-16 kindly confirm to me if the span of 1- 16 is correct.

    ReplyDelete